Hi Folks

I need an explanation in this regards. I am using Ge0/0 and Ge0/1 as WAN Ports and Ge0/3 as LAN Port on Cloud vEdge. Ge0/2 has been received for Local Internet link.

Now, the LAN to LAN Routing works fine but I am not able to capture the TCPDump output of port Ge0/3. So also this port is not visible under ifconfig output.

vpn 1routerospftimers spf 200 1000 10000redistribute omparea 0interface ge0/3network point-to-pointexitexit!!interface ge0/3description "Connected to LAN"ip address 172.16.100.17/30no shutdown!ompadvertise ospf externaladvertise connected!

BR01A# show interface ge0/0 | notab interface vpn 0 interface ge0/0 af-type ipv4ip-address 192.168.200.122/30if-admin-status Upif-oper-status Upif-tracker-status NAencap-type nullport-type transportmtu 1500hwaddr 00:50:56:a5:70:a7speed-mbps 1000duplex fulltcp-mss-adjust 1416uptime 11:22:17:19rx-packets 6431377tx-packets 5174767

BR01A# tcpdump interface ge0/3tcpdump -p -i ge0_3 -s 128 in VPN 0tcpdump: ge0_3: No such device exists(SIOCGIFHWADDR: No such device)

BR01A:~$ ifconfig -a | grep gege0_0 Link encap:Ethernet HWaddr 00:50:56:a5:70:a7 ge0_1 Link encap:Ethernet HWaddr 00:50:56:a5:71:ba ge0_2 Link encap:Ethernet HWaddr 00:50:56:a5:48:11 BR01A:~$

Solved! Go to Solution.